Integrate the Scandit SDK into your app

This getting started guide illustrates the steps required to integrate the Scandit Barcode Scanner module into your Titanium app.

Download the Scandit Barcode Scanner Titanium Module

Choose a plan (e.g., free “Enterprise Trial” or "Community" plan) at http://www.scandit.com/pricing and download the Scandit Barcode Picker module from your account.

It is generally not advised to download the module from the Titanium marketplace as it can cause an "unlicensed module error" for some users. If you do downloaded the Scandit Barcode Scanner module from the TI marketplace, sign up for a free community license at http://www.scandit.com/pricing. There are also other licenses available that include support for enterprise bar codes such as Code39, Code128, Datamatrix etc. If you are interested in those, just sign up for the corresponding license at http://www.scandit.com/pricing. These enterprise licenses come with a different SDK and you need to download the corresponding titanium module from the download section of your Scandit SDK account and add it as described above in step “Install the Scandit SDK module”.


Install the Scandit Barcode Scanner SDK module

  • Follow the Appcelerator instructions to add the Scandit Barcode Scanner module to the “modules” directory of your Titanium Studio installation: http://docs.appcelerator.com/platform/latest/#!/guide/Using_a_Module
  • Add the Scandit Barcode Scanner module to your tiapp.xml file - either by using the GUI editor or by editing the modules section and adding the following lines:
1 <module version="1.3.1" platform="android">com.mirasense.scanditsdk</module>
2 <module version="1.3.1" platform="iphone">com.mirasense.scanditsdk</module>


Start using the scanner module in your app

First you will have to import the module through require().

// load the Scandit SDK module
var scanditsdk = require("com.mirasense.scanditsdk");

At this point you need to sign in to your account at http://account.scandit.com to look up your license key (under the "License Key" section) as you now need to set it. You can also set your preferred camera at this point (back or front, back is the default).

scanditsdk.appKey = "-- ENTER YOUR SCANDIT LICENSE KEY HERE --";
scanditsdk.cameraFacingPreference = 0; // 0 = back, 1 = front

Before you create the barcode picker you should check that your app has permission to open the camera. An example of this would look the following way:

if (Ti.Media.hasCameraPermissions()) {
openScanner();
} else {
Ti.Media.requestCameraPermissions(function(e) {
if (e.success) {
openScanner();
} else {
alert('You denied camera permission.');
}
});
}

Once this is done you can now create the actual view from the module. Make sure that you always initialize it by calling init() before calling any other functions on the view (they will not take effect otherwise).

// Only after setting the license key instantiate the Scandit Barcode Picker view.
width:"100%",
height:"100%"
});
picker.init();

At this point you can make any necessary customizations like enabling or disabling symbologies etc. Have a look at the scanditsdkView API for all available options. Once all customizing is done you can present the view and at that point you will need to tell it to start scanning as it is not trying to decode barcodes before doing so.

picker.startScanning();


Example code

You can use the following example code as a starting point:

/*
* This code example illustrates how to integrate the Scandit SDK
* into your own application.
*
* IMPORTANT NOTE: Since we added support for landscape scanning
* in the 1.1.0 version of our plugin, you will need to update the
* way you instantiate the Scandit SDK in your Titanium app. See
* example below for more details.
*
* The example shows how to add a "start scan" button that invokes
* the scan view. A Ti.Gesture.addEventListener is used to detect
* orientation changes and to update the Scandit SDK picker to
* update the camera feed accordingly. If you are intending to
* use portrait and landscape mode in your app, make sure that the
* supported interface orientations are set correctly in the XCode
* project.
*
* NOTE: You will need a Scandit SDK License Key! If you don't have one
* yet, sign up at http://www.scandit.com. The Scandit SDK License Key
* is then available from your Scandit SDK account.
*
* For more information, see http://www.scandit.com/support or
* contact us at info@scandit.com.
*/
// load the Scandit SDK module
var scanditsdk = require("com.mirasense.scanditsdk");
// disable the status bar for the camera view on the iphone and ipad
if(Ti.Platform.osname == 'iphone' || Ti.Platform.osname == 'ipad'){
Titanium.UI.iPhone.statusBarHidden = true;
}
var openScannerIfPermission = function() {
if (Ti.Media.hasCameraPermissions()) {
openScanner();
} else {
Ti.Media.requestCameraPermissions(function(e) {
if (e.success) {
openScanner();
} else {
alert('You denied camera permission.');
}
});
}
};
// Sets up the scanner and starts it in a new window.
var openScanner = function() {
// First set the license key and which direction the camera should face.
scanditsdk.appKey = "-- ENTER YOUR SCANDIT LICENSE KEY HERE --";
scanditsdk.cameraFacingPreference = 0;
// Only after setting the license key instantiate the Scandit SDK Barcode Picker view
var picker = scanditsdk.createView({
width:"100%",
height:"100%"
});
// Before calling any other functions on the picker you have to call init()
picker.init();
// add a tool bar at the bottom of the scan view with a cancel button (iphone/ipad only)
picker.showToolBar(true);
// enable a few of the barcode symbologies. Note that the below list of symbologies
// is already enabled by default in Titanium. These calls are shown for illustration
// purposes. In your application make sure to only enable symbologies that you actually
// require and turn off anything else as every additional enabled symbology slows
// down recognition.
picker.setEan13AndUpc12Enabled(true);
picker.setEan8Enabled(true);
picker.setUpceEnabled(true);
picker.setCode39Enabled(true);
picker.setCode128Enabled(true);
picker.setQrEnabled(true);
picker.setDataMatrixEnabled(true);
// Create a window to add the picker to and display it.
var window = Titanium.UI.createWindow({
title:'Scandit SDK',
navBarHidden:true
});
// Set callback functions for when scanning succeeds and for when the
// scanning is canceled. This callback is called on the scan engine's
// thread to allow you to synchronously call stopScanning or
// pauseScanning. Any UI specific calls from within this function
// have to be issued through setTimeout to switch to the UI thread
// first.
picker.setSuccessCallback(function(e) {
picker.stopScanning();
setTimeout(function() {
window.close();
window.remove(picker);
alert("success (" + e.symbology + "): " + e.barcode);
}, 1);
});
picker.setCancelCallback(function(e) {
picker.stopScanning();
window.close();
window.remove(picker);
});
window.add(picker);
window.addEventListener('open', function(e) {
picker.startScanning(); // startScanning() has to be called after the window is opened.
});
window.open();
};
// Create button to open and start the scanner
var button = Titanium.UI.createButton({
"width":200,
"height": 80,
"title": "start scanner"
});
button.addEventListener('click', function() {
openScannerIfPermission();
});
var rootWindow = Titanium.UI.createWindow({
backgroundColor:'#000'
});
rootWindow.add(button);
rootWindow.open();


Next steps