Skip to main content

8.4.0-beta.1​

Released: May 5, 2026

New Features​

Barcode​

  • Added dotRadius property to BarcodeBatchBasicOverlay to allow customizing the size of dots when using the Dot overlay style.

Id​

  • Added support for reading the vehicle table on the back of New Zealand driving licences, with the latest expiry date returned; supported vehicle classes are 1–6, including L=learner and R=restricted variants.
  • Added support for new versions of USA, California – Driver's License; USA, North Carolina – Driver's License; and USA, Texas – Driver's License.

Core​

  • Redesigned ZoomSwitchControl to support multiple configurable zoom levels; the control now displays as a compact button that expands to show all available zoom levels, automatically filtered to those supported by the device hardware.
  • Added a new PinchToZoom gesture.
  • Enhanced CameraSettings to support ZoomLevels for the .NET API.
  • Added Camera Switch Control component to .NET.
  • DataCaptureView.DataCaptureContext can now be reassigned at runtime in MAUI, both via code-behind and XAML data binding. Previously, the context could only be set once during view initialization.

Performance Improvements​

Barcode​

  • Improved Code 128 scan robustness for codes with uneven blur and geometric distortions. Available on all platforms except WebAssembly without SIMD and ARM without FP16.
  • Improved 1D barcode scanning speed and reduced false positives for linear symbologies.
  • Further improved scanning of square DataMatrix codes with damaged or occluded timing patterns.

Behavioral Changes​

Barcode​

  • Smart Scan Intention now continuously adapts between Single Scan and Selection modes during a scanning session when Smart Scan Selection is enabled, switching back to Single Scan when the scene no longer requires Selection mode. Previously, once Selection mode was activated it remained active for the rest of the session.
  • Changed ITF scanning to reduce false positives by introducing checksum-dependent scoring. ITF has an optional checksum which is mandated to be enabled by many of the standards that use ITF as the data carrier. Starting with this release, checksum-passing ITF codes are scanned with more relaxed conditions than codes that don't pass the checksum test. This happens even if the optional mod 10 checksum isn't enabled. To disable this behavior, enable the no_checksum_dependent_validation symbology extension for the ITF symbology.
  • Removed the Abseil library dependency.
  • Reduced Code 39 false positives.

Core​

  • Updated mbedtls from version 3.6.5 to 3.6.6.

Bug Fixes​

Barcode​

  • Fixed a stability issue that could cause a crash when tracked barcodes were removed or expired during a scanning session.
  • Fixed an issue where BarcodeCountView would display incorrectly after rotating the device when a sibling view was present in the same parent view.
  • Fixed an unnecessary second scan callback that occurs after freezing barcode recognition.
  • Fixed PDF417 macro block file ID decoding to correctly handle numeric formatting according to the ISO/IEC 15438:2015 specification.
  • Fixed a crash that could occur when scanning barcodes with the k-out-of-n filter enabled, if some detected barcodes were not subject to filtering.

Id​

  • Fixed an issue where the US Permanent Residence Card was not processed through the VizMrz flow.

Smart Label Capture​

  • Fixed a memory leak in LabelCapture
  • Fixed an issue where the validation flow viewfinder was not displayed.
  • Fixed a race condition in the validation flow.
  • Fixed a bug where the label capture validation flow overlay sometimes did not reflect label capture settings when reused.
  • Fixed a bug that caused error messages in DataCaptureView to be rendered partially out-of-view.
  • Fixed a rare race condition in Label Capture.
  • Added .asDate() support to ExpiryDate and PackingDate label fields when the text is provided as manual input or as an Adaptive-Recognition-Engine response.

Core​

  • Fixed a crash that occurred when the DataCaptureContext singleton was initialized more than once.
  • Fixed a potential deadlock on iOS when reading the camera torch state from the main thread while the camera was starting up.

Deprecations​

Core​

  • Added PinchToZoom class for the .NET API; deprecated the ZoomGesture property in favor of ZoomGestures.

8.3.1​

Released: April 14, 2026

Bug Fixes​

Smart Label Capture​

  • Fixed the validation flow to accept dates in more formats when manually entered
  • Fixed a race condition in the validation flow

8.3.0​

Released: March 26, 2026

New Features​

Barcode​

  • Added support for composite codes in SparkScan
  • Added the LabelCaptureButtonVisible property and LabelCaptureButtonTapped event to SparkScanView, allowing users to navigate from SparkScan to Smart Label Capture

Id​

  • Added support for OCR scanning of the 2026 version of Victoria mobile driver licenses
  • Added IdCaptureSettings.anonymizeDefaultFields setting that controls whether the SDK applies default anonymization rules for specific document types and regions

Smart Label Capture​

  • Fixed a rare race condition

Core​

  • Introduced .NET 10 support on Scandit SDK for .NET
  • Added LabelCapture Validation Flow Manual input support for allowing developers to receive a callback when the users trigger the manual input, as well as placeholder support for the overlay’s text fields. Existing users of the Validation Flow must implement the new interface when upgrading to this version.

Performance Improvements​

Barcode​

  • Improved EAN8 false positive filtering in strict mode
  • Improved speed of MatrixScan Count scanning phase for mid- and high-end devices

Bug Fixes​

Barcode​

  • Fixed a stability issue that could cause a crash when tracked barcodes were removed or expired during a scanning session.

Id​

  • Fixed BarcodeDictionary anonymization setting for iOS and Web
  • Fixed support for UAE Esaad card
  • Sanitized name fields on ACT driver license to split FullName and populate first and last name properties
  • Added support for scanning MRZ from the back of Argentinian DN when using FullDocumentScanner
  • Fixed misplaced MRZ anonymization on FullFrame images.

Core​

  • Fixed issue where Camera now always returns a valid instance (backed by NoOpCamera when no native camera is available)
  • Fixed a potential app hang when the app transitions to the background for licenses without analytics enabled.
  • Fixed a potential deadlock on iOS when reading the camera torch state from the main thread while the camera was starting up.

8.2.1​

Released: March 5, 2026

Bug Fixes​

Id​

  • Sanitized name fields on ACT DL. Splits FullName to populate first and last name properties

Smart Label Capture​

  • Fixed a rare race condition

8.2.0​

Released: February 13, 2026

New Features​

Smart Label Capture​

  • Smart Label Capture is now available on .NET for Android. It enables multi-modal data capture, extracting barcode and text data from labels simultaneously and making complex data entry up to 7 times faster. Ideal for labels containing serial numbers, weights, or expiry dates, it improves accuracy, reduces errors, and prevents revenue loss from incorrect information.

Performance Improvements​

Core​

  • Reduced intermittent memory spikes while configuring the barcode scanner across all capture modes

Bug Fixes​

Barcode​

  • Improved the Smart Scan Intention logic for detecting main codes + five-digit add on codes. This improves the rate of complete main + add-on code pairs.
  • Fixed an issue where the camera preview appeared rotated 90 degrees in landscape orientation
  • Fixed BarcodeCount Scan Preview issues including: fixed an issue where preview barcodes were used to populate the scanning list, the correct feedback is played when a barcode not in list is scanned, fixed an issue where scanning was not possible after the app was put in background, and corrected highlight orientation in landscape
  • Fixed an issue where MatrixScan AR circle highlights stopped pulsing when the app was restored from the background
  • Added cameraStateOnStop property to BarcodeFindView to optimize camera transitions when switching between modes
  • Fixed the missing found item icon in the MatrixScan Find carousel

Id​

  • Treated Puerto Rico driver licenses as AAMVA to enforce barcode capture with FullScanner
  • Fixed a bug that would cause Canada Northwest Territories driver license scans to be incomplete

Core​

  • Fixed an issue where the interface and video feed could have different visual orientations
  • Fixed an issue where some LabelCapture fields were being returned incorrectly on TS frameworks
  • Fixed BarcodeBatchBasicOverlayStyle.Frame such that it now correctly displays as a frame on iOS and MAUI iOS platforms, where previously setting the style to Frame would incorrectly render as a dot due to an enum value mismatch in the iOS binding layer

8.1.4​

Released: April 21, 2026

Bug Fixes​

Barcode​

  • Fixed a crash that could occur when scanning barcodes with the k-out-of-n filter enabled, if some detected barcodes were not subject to filtering.
  • Fixed a crash that occurred when the DataCaptureContext singleton was initialized more than once.

Core​

  • Fixed a rare issue that was causing a crash when the app moved to the background.

8.1.3​

Released: March 25, 2026

Bug Fixes​

Core​

  • Fixed a potential app hang when the app transitions to the background for licenses without analytics enabled.
  • Fixed a potential deadlock on iOS when reading the camera torch state from the main thread while the camera was starting up.

8.1.2​

Released: March 9, 2026

Bug Fixes​

Barcode​

  • Fixed a stability issue that could cause a crash when tracked barcodes were removed or expired during a scanning session

Smart Label Capture​

  • Fixed a rare race condition

8.1.1​

Released: February 5, 2026

Performance Improvements​

Core​

  • Reduced intermittent memory spikes while configuring the barcode scanner across all capture modes

Bug Fixes​

Core​

  • Fixed an issue where the camera preview appeared rotated 90 degrees in landscape orientation
  • Fixed an issue where the interface and video feed could have different visual orientations

8.1.0​

Released: December 17, 2025

New Features​

Barcode​

  • Smart Scan Selection is now available in Barcode Capture. Scanning a single barcode is often difficult in environments where multiple barcodes are placed closely together, like on a densely packed warehouse shelf or on a package with various labels. This can lead to scanning the wrong item, causing errors and slowing down operations. Smart Scan Selection solves this problem by automatically detecting when a user is trying to scan in a "dense barcode" environment. The interface then intelligently adapts, providing an aimer to help the user precisely select the desired barcode without needing to manually change any settings. This creates a seamless and more intuitive scanning experience.
  • Extended Aztec codes reader to support scanning mirrored codes.
  • Added support for square DataMatrix codes with one-sided damage or occlusion. This feature is only enabled in Barcode Capture and SparkScan.
  • Added, in BarcodeAr, a new annotation type (BarcodeArResponsiveAnnotation), which automatically switches between close-up and far-away info annotations based on the barcode's size on screen

Id​

  • Added NationalityISO property that maps results from Nationality field to country ISO code
  • Added RejectionDiagnosticJSON property to CapturedId to report debug info during Timeout rejections
  • Added support for new California DL, new South Carolina DL, Arizona Medical Marijuana Card, Kuwait Civil card, and new Texas DL
  • Our SDK can now scan the following documents both in single-side and double-side mode:
    • All Mexican DLs
    • Mexican Voter Cards

Performance Improvements​

Barcode​

  • Improved MicroQR detector tolerance to quiet zone violations
  • Improved suppression of incorrect Codabar recognitions when using the "strict" symbology extension

Behavioral Changes​

Barcode​

Core​

  • Added the CodeDuplicate class to simplify setting special sentinel values for the CodeDuplicateFilter property across barcode scanning modes.

Bug Fixes​

Barcode​

  • Fixed a rare out-of-bound memory access crash when scanning low-resolution or blurry EAN13/UPCA codes at a specific distance
  • Added the cameraStateOnStop property to BarcodeFindView to optimize camera transitions when switching between modes

Id​

  • Fixed an issue where front expiry date anonymization rectangle is erroneously drawn on front and back
  • Fixed a bug that prevented VizResult anonymization of the following fields: additionalAddressInformation, bloodType, employer, fathersName, issuingAuthority, maritalStatus, mothersName, placeOfBirth, profession, race, residentialStatus
  • Fixed a bug concerning return complete instead of cropped images on the back of EU driving licenses

Core​

  • Fixed a small memory leak that affected fresh install runs only
  • Fixed an issue where barcode scanning would permanently stop after the app returned from background, particularly when camera permission dialogs were shown during initialization

8.0.1​

Released: January 14, 2026

Bug Fixes​

Barcode​

  • Fixed a rare out-of-bound memory access crash when scanning low-resolution or blurry EAN13/UPCA codes at a specific distance

Core​

  • Fixed an issue where the interface and video feed could have different visual orientations
  • Fixed a small memory leak that affected fresh install runs only

8.0.0​

Released: November 4, 2025

New Features​

Scandit's SDK 8.0 marks the evolution of data capture from a high-performing scanning tool into an intelligent AI-powered workflow enabler. As frontline operations face mounting pressures with more data points to capture, increasingly complex workflows to navigate, and tighter resource constraints, SDK 8.0 delivers a set of innovations that:

  • Adapt its scanning settings and UI to context by analyzing the scanning environment and user intent;
  • Automate the capture of any data format, barcode clustering, task handling or camera settings;
  • Accelerate critical use cases to maximize ROI through intuitive, streamlined scanning workflows, using interactive AR-guidance, adaptive UI and out-of-the-box custom-branded passenger experiences.

With SDK 8.0 businesses can transform data capture from a basic function to a strategic advantage. It enables intelligent scanning that:

  • Understands not just what is being scanned, but also what you want to scan and why you’re scanning it
  • Adapts accordingly by adjusting scanning settings and/or UI, understanding what comes next and how to guide users seamlessly through sophisticated tasks to ensure the highest level of productivity.

Core​

  • We've fundamentally redesigned our .NET SDK's architecture to better align with the modern .NET ecosystem!
    • Platform-Agnostic .net8.0 and net9.0 Targets: The SDK now includes generic net8.0 and .net9.0 targets. This allows you to reference Scandit.DataCapture.Core and related packages directly from non-UI projects, such as class libraries or unit test projects. This makes it significantly easier to build modular, testable applications following principles like Clean Architecture.
  • Mandatory SDK Initialization: Due to the architectural changes, the SDK now requires explicit initialization at application startup. The public API has not changed, but you must add the corresponding initialization code to your application for the SDK to function correctly.

ID​

  • Added ElementsToRetain to MobileDocumentScanner: The set of data elements that the application intends to retain from scanned mobile documents. This information is used to set the IntentToRetain flag in ISO 18013-5 mdoc requests, which is required for legal compliance with data protection standards. An empty set indicates no elements will be retained, and IntentToRetain will be set to false for all fields.
  • ID Capture now supports full-frame anonymization.
  • The result of decodeMobileDriverLicenseViz, which is currently returned as part of the VizResult within CapturedId, will now be provided through a new field named mobileDocumentOcr.
  • Added CapturedId::isCitizenPassport, which indicates whether the passport was issued to a citizen of the issuing country. Returns false for travel documents such as refugee, stateless, or alien passports, and for any passports issued by organizations rather than states.
  • The following Chinese travel permits now extract VIZ + MIZ data during double-sided scanning flows:
    • CT - Taiwan Residents Mainland Travel Permit
    • W - Mainland Residents Exit-Entry Permit to and from Hong Kong and Macao
    • CD - Mainland Residents Entry-Exit Permit to and from Taiwan

Behavioral Changes​

Barcode​

  • Symbology RM4SCC has been renamed to ROYAL_MAIL_4STATE.
  • Changed the default highlight brush in SparkScan and Barcode Capture.

ID​

  • The configuration for the following documents has been changed as detailed below:
    • Australian mobile driver licenses (mDL) are now treated as normal documents, with no separate mode.
    • US Green Cards are now treated as residence permits.
  • Removed the deprecated API DateResult::toDate. Use DateResult::toLocalDate or DateResult::toUtcDate instead.
  • fullName now an optional field on all IdCapture result types and capturedMrz now an optional field on MrzResult.

Bug Fixes​

ID​

  • Fixed a bug that could get the scanner stuck when scanning a US passport card.

Deprecations​

Core​

  • VideoResolution::Auto is now deprecated. Please use the capture mode's recommendedCameraSettings for the best results.

Barcode​

  • All previously deprecated APIs have been removed in this release.

7.6.7​

Find earlier versions in the release notes section of version 7