6.28.11
Released: July 10, 2026
No updates for this framework in this release.
6.28.10
Released: May 8, 2026
No updates for this framework in this release.
6.28.9
Released: April 2, 2026
No updates for this framework in this release.
6.28.8
Released: March 3, 2026
Bug Fixes
Barcode
- Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes
Core
- Fixed Zoom Control visibility on MS Find for devices with an Ultra-Wide camera, including non-Pro models
6.28.7
Released: November 3, 2025
No updates for this framework in this release.
6.28.6
Released: July 25, 2025
Bug Fixes
ID
- Fixed an issue where preexisting OTA models on the device, if any, would be loaded instead of the latest model for the SDK version, leading to errors.
6.28.5
Released: April 4, 2025
No updates for this framework in this release.
6.28.4
Released: February 14, 2025
Bug Fixes
Core
- Fixed an issue which reduced scans for low-resolution and blurry codes affected by distortion or damage, when multiple symbologies were enabled.
- Fixed an issue where scanned blurry codes locations are sometimes flipped.
6.28.3
Released: December 23, 2024
Bug Fixes
Core
- Fixed an issue causing the
SparkScanViewto not be rendered on top of the host application content.
6.28.2
Released: December 12, 2024
No updates for this framework in this release.
6.28.1
Released: October 29, 2024
New Features
ID
- ID Capture now supports scanning the following additional documents:
- Armenia - Passport
- Bahamas - Residence Permit, Work Permit
- Colombia - Temporary Protection Permit
- Comoros - Passport
- Dominican Republic - Non-Voter ID
- Jamaica - Voter ID
- Kazakhstan - Passport
- Kyrgyzstan - Passport
- Lebanon - Driver's License
- Peru - Minor ID
- Tajikistan - Passport
- Turkmenistan - Passport
- Uzbekistan - Passport, ID Card
Bug Fixes
Barcode
- Fixed a sporadic issue where camera errors would result in a crash on some devices.
6.28.0
Released: October 8, 2024
New Features
Barcode
- Our Barcode Generator now allows the generation of Aztec codes. See
SDCAztecBarcodeGeneratorBuilder. - On Barcode Capture and SparkScan, we optimized the frame processing time in 4k-UHD resolution with dynamic resolution selection, resulting in up to 35% reduction on high-end devices and consistent performance improvements across all supported devices. platforms.
- MatrixScan Count users can now further classify the "not in list" barcodes when scanning against a list. Tapping on them will show a popup where the barcodes can be accepted or rejected. Check
barcode.count.ui.BarcodeCountView.BarcodeNotInListActionSettingsto enable and customize the functionality. The classified barcodes will be added tobarcode.count.BarcodeCountCaptureListSession.AcceptedBarcodesorbarcode.count.BarcodeCountCaptureListSession.RejectedBarcodes. - MatrixScan Find now uses a 4:3 aspect ratio, providing a significantly larger field of view for enhanced scanning accuracy and coverage.
- Added
BarcodeFindView.ShouldShowZoomControlwhich enables the display of a button that allows switching to ultra wide lenses on supported devices for scanning at close range in narrow environments.
ID
- ID Capture now supports scanning:
- Visual Inspection Zone (VIZ) of New York City IDs.
- Florida Medical Marijuana IDs.
- Added
scandit.datacapture.id.CapturedId.UsRealIdStatusto indicate whether a document is REAL ID compliant.
Label
- Added support for text fields that are identified only based on their data pattern. These do not need textual identifiers to be identified, and therefore no data type patterns (i.e., patterns for the textual identifiers) need to be specified for them.
Bug Fixes
Barcode
- Fixed result data encoding classification for raw byte data in 2d barcodes, in particular for Shift-JIS encoding.
- Resolved cases in which Smart Scan Intention was possibly reporting the wrong barcode when when the camera was quickly changing direction with a single barcode in the scene.
- Fixed an issue where it was not possible to scan non-fluorescent French-Post barcodes without the extension
fluorescent_orange_ink.
6.27.2
Released: September 23, 2024
No updates for this framework in this release.
6.27.1
Released September 6, 2024
No updates for this framework in this version.
6.27.0
Released: September 5, 2024
API Changes
Barcode
- The
BarcodeTrackingAdvancedOverlay.ViewForTrackedBarcode()andBarcodeTrackingAdvancedOverlayListener.ViewForTrackedBarcode()methods no longer support rendering any kind of images. For further details about this backwards incompatible change, contact Scandit Support.
Bug Fixes
Barcode
- Resolved cases in which Smart Scan Intention was possibly reporting the wrong barcode when the camera was quickly changing direction with a single barcode in the scene.
6.26.0
Released: August 15, 2024
New Features
Barcode
- Added torch control to BarcodeCount with
BarcodeCountView.shouldShowTorchControlandBarcodeCountView.torchControlPositionto control visibility and position inBarcodeCountView.
ID
- Added
AamvaBarcodeVerificationResult.statuswhich includes classification confidence asAamvaBarcodeVerificationStatus.FORGEDorAamvaBarcodeVerificationStatus.LIKELY_FORGED. - Added properties
VizResult.firstName,VizResult.lastName,VizResult.secondaryLastName,VizResult.fullName. - Added
DrivingLicenseDetails.restrictionsandDrivingLicenseDetails.endorsementswhich correspond to the restrictions to driving privileges and to the additional privileges granted to the driver license owner respectively.
Behavioral Changes
Barcode
- Default value of
BarcodeCaptureSettings.batterySavingMode(deprecated) andBarcodeCaptureSettings.batterySavinghas been changed fromBatterySavingMode.OFFtoBatterySavingMode.AUTO.
Performance Improvements
Barcode
- Improved ArUco scanning when color inverted codes are enabled.
- Improved tracking robustness on Barcode Count.
- Significantly lowered the rate of false positives (i.e., presumed unscanned barcodes) when using Barcode Count.
- Improved recognition rate for Composite Codes, with a particular focus on codes with small 2d components (e.g. PDF417).
- Improved recognition rate of linear codes which are partially affected by damage or covered in plastic wrap, with a particular focus on Codabar barcodes.
- Improved localization of postal codes, up to 25% faster.
Bug Fixes
ID
AamvaVizBarcodeComparisonResult.frontMismatchImagenow only returns an image whenAamvaVizBarcodeComparisonResult.checksPassedis false.- Fixed an error 255 that would prevent capturing MRZ for some license keys, for which this feature was enabled.
Deprecations
- Deprecated
SparkScanSession.newlyRecognizedBarcodes, preferSparkScanSession.newlyRecognizedBarcode. - Deprecated
BarcodeCaptureSession.newlyRecognizedBarcodes, preferBarcodeCaptureSession.newlyRecognizedBarcode. - Deprecated
BarcodeCaptureSettings.batterySavingModein favor ofBarcodeCaptureSettings.batterySaving. - Deprecated
BarcodeTrackingScenarioandBarcodeTrackingSettings.forScenario(). Setting a scenario is no longer recommended,BarcodeTrackingSettings.BarcodeTrackingSettings()should be used instead. - Deprecated
TextCapture. - Deprecated
SparkScanView.shouldShowScanAreaGuides,SparkScanView.soundModeButtonVisible,SparkScanView.hapticModeButtonVisibleandSparkScanView.fastFindButtonVisible(renamedSparkScanView.barcodeFindButtonVisible). Also deprecatedSparkScanViewUiListener.onFastFindButtonTap()(renamedSparkScanViewUiListener.onBarcodeFindButtonTap()). - Deprecated
LaserlineViewfinderStyle. - Deprecated
LaserlineViewfinder. - Deprecated Legacy value of the
RectangularViewfinder. - Deprecated Legacy value of the
BarcodeCaptureOverlayStyle. - Deprecated Legacy value of the
BarcodeTrackingBasicOverlayStyle. - Deprecated
AamvaBarcodeVerificationResult.allChecksPassed.AamvaBarcodeVerificationResult.statusshould be used instead.
6.25.3
Released: September 2, 2024
Bug Fixes
- Concatenated ArUco codes are now comma-separated.
6.25.2
Released: August 2, 2024
No updates for this framework in this release.
6.25.1
Released: August 1, 2024
Bug Fixes
Barcode
- Fixed an issue in MatrixScan Count that was causing a reset after a rotation.
ID
- Fixed an error 255 that would prevent capturing MRZ for some licenses where this feature is supposed to be enabled.
Core
6.25.0
Released: July 5, 2024
New Features
Barcode
- Added torch control to BarcodePick with
SDCBarcodePickViewSettings.showTorchButtonto enable showing a torch button when usingSDCBarcodePickView. The torch button as well as the zoom button (shown with:SDCBarcodePickViewSettings.showZoomButton) can be repositioned withSDCBarcodePickViewSettings.torchButtonPositionandSDCBarcodePickViewSettings.zoomButtonPosition. - Added ability to customize the minimum width and height of the highlights in the following styles:
- Added the following properties to apply a
SDCBarcodePickStatusIconSettingsobject and customize the status icons appearance:
ID
-
ID Capture now supports extracting information from the back side of European driver’s licenses.
-
Added the following properties to
SDCVizResult:SDCVizResult.bloodTypeto represent the blood type of the document owner.SDCVizResult.sponsorto represent the sponsor of the document owner.SDCVizResult.mothersNameto represent the mother’s name of the document owner.SDCVizResult.fathersNameto represent the father’s name of the document owner.
-
ID Capture now supports scanning the Visual Inspection Zone (VIZ) on the back of the European Health Insurance Card.
-
Improved the extraction of the document number from UK driver’s licenses.
Performance Improvements
Barcode
- Improved recognition rate for Composite A and Composite B barcodes, thanks to an increased robustness for small and low resolution MicroPDF417.
- Improved recognition rate of long, thin linear 1d codes, such as those found on electronic shelf labels (ESLs).
- Improved recognition rate of linear codes which are partially affected by damage or glare, with a particular focus on codabar barcodes.
ID
- Improved the accuracy of the AAMVA Barcode Verification.