Skip to main content

7.6.15​

Released: September 24, 2026

Bug Fixes​

Barcode​

  • Fixed a memory leak in SparkScan when using the item-based API.
  • Fixed BarcodeAr not displaying an overlay for every scanned barcode when duplicate barcode values are present.

Core​

  • Fixed a rare crash during camera setup on iOS when the active camera format reported no supported frame-rate ranges.

7.6.14​

Released: May 8, 2026

Bug Fixes​

Core​

  • Fixed a rare crash when starting camera capture while under memory pressure.

7.6.13​

Released: April 27, 2026

Bug Fixes​

Smart Label Capture​

  • Fixed a memory leak in LabelCapture.

Core​

  • Fixed a rare crash when opening the camera.

7.6.12​

Released: April 21, 2026

Bug Fixes​

Core​

  • Fixed a crash that occurred when the DataCaptureContext singleton was initialized more than once.
  • Fixed crashes caused by RuntimeExceptions thrown by OEM camera code that are not part of the standard Android Camera API contract; these exceptions are now caught and logged instead of crashing.

7.6.11​

Released: April 16, 2026

Bug Fixes​

Barcode​

  • Fixed a crash that could occur when scanning barcodes with the k-out-of-n filter enabled, if some detected barcodes were not subject to filtering.

Core​

  • Fixed a rare issue that was causing a crash when the app moved to the background
  • Fixed a rare SIGABRT crash on camera initialization on devices whose HAL returns null from Camera.Parameters.getSupportedFocusModes() (e.g. industrial barcode scanners like the Newland NLS-MT93).
  • Fixed a rare deadlock issue that occurred when an activity was stopped.

7.6.10​

Released: April 2, 2026

No updates for this framework in this release.

7.6.9​

Released: March 17, 2026

Bug Fixes​

Core​

  • Fixed a potential app hang when the app transitions to the background for licenses without analytics enabled
  • Fixed a potential deadlock on iOS when reading the camera torch state from the main thread while the camera was starting up
  • Fixed an app freeze/deadlock when navigating to the DataCaptureView with React Native New Architecture (Fabric)

7.6.8​

Released: March 6, 2026

Bug Fixes​

Barcode​

  • Fixed a stability issue that could cause a crash when tracked barcodes were removed or expired during a scanning session

7.6.7​

Released: February 2, 2026

Performance Improvements​

Core​

  • Reduced intermittent memory spikes while configuring the barcode scanner across all capture modes

7.6.6​

Released: January 23, 2026

Bug Fixes​

Barcode​

  • Fixed an issue where the successful hint in BarcodeFind is not displayed
  • Fixed a rare out-of-bound memory access crash when scanning low-resolution or blurry EAN13/UPCA codes at a specific distance

Core​

  • Fixed a crash in the DataCaptureView overlay management that could occur during rapid view updates
  • Fixed an issue where the camera would not restart when opened from another app
  • Fixed a bug that could in rare cases produce a black screen when starting the camera

7.6.5​

Released: November 12, 2025

Bug Fixes​

Core​

  • Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes

7.6.4​

Released: November 5, 2025

Bug Fixes​

Barcode​

  • Fixed an issue where touches were not going through when components where placed inside the SparkScanView.

7.6.3​

Released: October 29, 2025

Bug Fixes​

Barcode​

  • Fixed an issue where touches where not going through when components where placed inside the SparkScanView.

7.6.2​

Released: October 20, 2025

Bug Fixes​

Barcode​

  • Fixed an issue occurring during reset of BarcodeCaptureSession in some rare cases.
  • Fix handling of ImageFrameSource turn on and off calls.
  • Fixed SparkScanView camera releasing when calling stopScanning on Android.
  • Various fixes for SparkScanView Lifecycle Management:
    • Added shouldHandleAndroidLifecycleAutomatically?: boolean prop to SparkScanView for manual control over Android lifecycle events.
    • Breaking Change:
      • Use onHostPause() instead of stopScanning() for Android lifecycle handling
      • When manually handling app background/foreground transitions:
        • Foreground: Call prepareScanning()
        • Background: Call onHostPause() (previously stopScanning())
    • Default behavior unchanged, automatic lifecycle handling remains enabled.

Smart Label Capture​

  • A new method for ReceiptScanningListener was added. This is being invoked when a connection error occurs while trying to recognize a document.

7.6.1​

Released: September 18, 2025

Bug Fixes​

Core​

  • Fixed decoding of some ASCII-encoded DataMatrix codes ending with '254' codeword followed by padding.
  • Improved support for missing or damaged timing patterns in Aztec codes.

Barcode​

  • Fixed a crash that occurred when scanning barcodes encoded with non-UTF-8 data.

7.6.0​

Released: September 15, 2025

New Features​

ID​

  • A proprietary Transaction ID can now be attached to each ID scan to enable end-to-end traceability of user transactions.
  • Better UX when scanning Mobile Driver Licenses (mDL) with new screens to handle Bluetooth device state and data transmission progress.
  • Added support for the following documents:
    • Canadian IDs and Driver Licenses for Newfoundland And Labrador, Northwest Territories, Prince Edward island and Yukon
    • UK Military iD (MOD 90 ID Card)
    • New US Driver License versions in Alaska and New Hampshire
    • Georgia Medical Marijuana Card

Smart Label Capture​

  • Smart Label Capture now includes customizable feedback configurable via LabelCapture.feedback. The feedback is now automatic on scan, requiring less code to set it up.

Parser​

  • The GS1 parser now allows for dates in format YYYYMM also in non-strict mode if the year starts with 20XX.

Bug Fixes​

Core​

  • Fixed a crash when reloading a React-Native App from the metro terminal with the r option.
  • Fixed a breaking change in React-Native 0.81 related to the required Kotlin accessors.
  • Overhauled React Native Samples to more closely follow React best practices.
  • Fixed an issue with calling dispose() on the context.

ID​

  • ID scanning results for gender of documents that do not specify a gender are now correctly mapped as unspecified.

Behavioral Changes​

  • The MRZ fields optional and optional1 have been renamed to optionalDataInLine1 and optionalDataInLine2, respectively.
  • Exposed public constructors for BarcodeAr, BarcodeBatch, BarcodeCapture, BarcodeSelection, BarcodeCount, SparkScan.

Deprecations​

  • Deprecated resultShouldContainImage.
  • Deprecated AamvaBarcodeVerification.
  • Deprecated IdCaptureSettings.decodeIsoMobileDriverLicenses and IdCaptureSettings.decodeMobileDriverLicenseViz.
  • Deprecated BarcodeCaptureOverlayStyle.
  • Deprecated the recommendedCameraSettings prop in different modes in favor of the static function.
  • Deprecated BarcodeBatch.forContext. A new constructor has been added.
  • Deprecated BarcodeBatchBasicOverlay.withBarcodeBatch, BarcodeBatchBasicOverlay.withBarcodeBatchForView and BarcodeBatchBasicOverlay.withBarcodeBatchForViewWithStyle. A new public constructor has been added.
  • Deprecated BarcodeCapture.forContext. A new constructor has been added.
  • Deprecated BarcodeCaptureOverlay.withBarcodeCapture, BarcodeCaptureOverlay.withBarcodeCaptureForView and BarcodeCaptureOverlay.withBarcodeCaptureForViewWithStyle. A new public constructor has been added.
  • Deprecated BarcodeCount.forContext. A new constructor has been added.
  • Deprecated BarcodeSelection.forContext. A new constructor has been added.
  • Deprecated BarcodeSelectionBasicOverlay.withBarcodeSelection, BarcodeSelectionBasicOverlay.withBarcodeSelectionForView and BarcodeSelectionBasicOverlay.withBarcodeSelectionForViewWithStyle. A new public constructor has been added.
  • Deprecated SparkScan.forSettings. A new constructor has been added.
  • Deprecated SparkScanView.forSettings. A new constructor has been added.
  • Deprecated IdCapture.forContext. A new constructor has been added.
  • Deprecated IdCaptureOverlay.withIdCapture and IdCaptureOverlay.withIdCaptureForView. A new public constructor has been added.
  • Deprecated AamvaBarcodeVerifier. Replaced by IdCaptureSettings.rejectForgedAamvaBarcodes.
  • Deprecated LabelCapture.forContext. A new constructor has been added.
  • Deprecated LabelCaptureBasicOverlay.withLabelCapture and LabelCaptureBasicOverlay.withLabelCaptureForView. A new public constructor has been added.
  • Deprecated LabelCaptureAdvancedOverlay.withLabelCapture and LabelCaptureAdvancedOverlay.withLabelCaptureForView. A new public constructor has been added.

7.5.2​

Released: December 4, 2025

Bug Fixes​

Barcode​

  • Fixed a rare out-of-bound memory access crash when scanning low-resolution or blurry EAN13/UPCA codes at a specific distance
  • Fixed a crash that occurred when scanning barcodes encoded with non-UTF-8 data.
  • Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes

Smart Label Capture​

  • Fixed a timing issue that might cause overlays to get stuck on screen in the LabelCaptureAdvancedOverlay

7.5.1​

Released: September 4, 2025

Bug Fixes​

Core​

  • ScanditIDC simulator framework no longer incorrectly uses MinimumOSVersion 16.6, but is now set to iOS 15.0.

7.5.0​

Released: August 12, 2025

New Features​

Barcode​

  • Added a proper API to configure the file system caching of the Frames: FrameDataSettings.IsFileSystemCacheEnabled(). Defaults to false.
  • SparkScan now supports Smart Scan Selection. Scanning a single barcode is often difficult in environments where multiple barcodes are placed closely together, like on a densely packed warehouse shelf or on a package with various labels. This can lead to scanning the wrong item, causing errors and slowing down operations. Users might have to manually switch to a special, more precise scanning mode (Target Mode), which is inefficient. Smart Scan Selection solves this problem by automatically detecting when a user is trying to scan in a "dense barcode" environment. The interface then intelligently adapts, providing an aimer to help the user precisely select the desired barcode without needing to manually change any settings. This creates a seamless and more intuitive scanning experience.
  • A new Restocking workflow sample application is now available, demonstrating MatrixScan Pick functionality.
  • Added an API to automatically rotate the frame image that is getting output by the camera: FrameDataSettings.IsAutoRotateEnabled(). Defaults to false.
  • AR Overlays now work correctly also when the new architecture is enabled. To properly display AR overlays, you must use at least version 0.79.0 of React-Native. For iOS, also implement ScanditReactNativeFactoryContainer in your AppDelegate after following the migration of your app delegate.
  • Improved support for non-standard GS1 AI codes.
  • The Barcode class now exposes a module count.

Smart Label Capture​

  • Smart Label Capture introduces a new workflow: Validation Flow. This workflow allows users to confirm OCR results, manually correct errors, or individually capture missing fields without needing to rescan the entire label. It is designed to address common issues such as glare, occlusion, and poor lighting that lead to incomplete label reads, helping you maintain high data integrity.

ID​

  • VIZ scanning now supports checking Real ID compliance for US documents.
  • Scanning of ISO-18013 compliant mobile driver licenses is now supported in select justifications (Queensland Digital License).

Performance Improvements​

Smart Label Capture​

  • Improved performance when extracting text from 7-segment displays.

Bug Fixes​

Core​

  • Opt out the edge-to-edge enforcement in Android 15 for all react-native samples.
  • Fixed a compatibility issue with React-Native 0.80.
  • Fixed a memory leak on React-Native when running on iOS where the DataCaptureView was not correctly disposed.

Barcode​

  • Fixed a crash in SparkScan when navigating away from SparkScan when holding the scan button.

ID​

  • Fixed bug in AAMVABarcodeVerifier that triggered error callbacks for each verification after updating from some older SDK version.
  • Fixed an issue where an error was thrown on React-Native hot reload.

Behavioral Changes​

  • Sample applications now use https to access the DataCapture SPM repository instead of ssh.

Deprecations​

  • Deprecated BarcodeCaptureOverlayStyle.

7.4.5​

Released: February 6, 2026

Bug Fixes​

Barcode​

  • Fixed a crash that occurred when scanning barcodes encoded with non-UTF-8 data

Core​

  • Fixed a bug that could in rare cases produce a black screen when starting the camera
  • Fixed a crash in the DataCaptureView overlay management that could occur during rapid view updates

7.4.4​

Released: November 22, 2025

Bug Fixes​

Core​

  • Fixed a rare crash in the EAN/UPC reader.
  • Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes

7.4.3​

Released: August 29, 2025

Bug Fixes​

Core​

  • Fixed double-pairing in the ArUco marker pair detection for MatrixScan Pick and MatrixScan Batch.

7.4.2​

Released: August 15, 2025

No updates for this framework in this release.

7.4.1​

Released: July 14, 2025

Bug Fixes​

Core​

  • Fixed a compatibility issue with React-Native 0.80.

Barcode​

  • Fixed a crash in SparkScan when navigating away from SparkScan while holding the scan button.

7.4.0​

Released: June 19, 2025

New Features​

Barcode​

  • Added an API to update the width and height of the AR View.
  • Added APIs in MatrixScan Find to track session updates and modify the progress bar color.
  • The LaserViewfinder is now available.
  • Added the option to enable the SmartLabelCapture mode in the SparkScanView.

ID​

  • Added support for Spanish residence permit "Green NIE".
  • Added support for US Medical Marijuana IDs from West Virginia, Florida, Pennsylvania, Nevada, New York, and Oklahoma.

Smart Label Capture​

  • Added an API to set the symbology setting in the label definition.

Performance Improvements​

  • Updated ARM MbedTLS from 3.6.2 to 3.6.3.

ID​

  • Improved AAMVA Barcode Verification accuracy for Missouri documents.

Bug Fixes​

  • Fixed the pod files configuration for React Native sample applications in GitHub.

Barcode​

  • Fixed an issue where caching the barcode capture object and register/unregistering the BarcodeCaptureListener multiple times would result on not receiving events anymore.

ID​

  • Fixed an issue where the middle name read from an AAMVA-compliant barcode would be at times returned as NONE.

7.3.4​

Released: February 24, 2026

Bug Fixes​

Barcode​

  • Fixed a crash that could occur in Barcode Pick when the BarcodePickView is deallocated but the guidance on screen was being updated

Core​

  • Fixed a bug that could in rare cases produce a black screen when starting the camera
  • Fixed a crash when toggling the zoom switch without setting a frame source
  • Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes

7.3.3​

Released: July 25, 2025

Bug Fixes​

ID​

  • Fixed an issue where preexisting OTA models on the device, if any, would be loaded instead of the latest model for the SDK version, leading to errors.

7.3.2​

Released: June 25, 2025

No updates for this framework in this release.

7.3.1​

Released: June 13, 2025

Bug Fixes​

  • Fixed the pod files configuration for React Native sample applications in GitHub.

7.3.0​

Released: May 16, 2025

New Features​

  • THe SDK is now using React Native 0.79.0.

Barcode​

  • Added support for structured append QR codes in all MatrixScan modes. They are exposed over ScObjectCountingSession and rendered as a group. The API is identical to how structured append is used in a single barcode use case: the entire structured append data is accessible on all sub code results.

ID​

  • Unify the result value when parsing the sex field, including added support for special characters used, so that it is always one of the values female, male or unspecified.

Bug Fixes​

Barcode​

  • Fixed an issue in SparkScan where the mini preview was closed after a scan, even if the preview behavior was set to Persistent.
  • Fixed a bug in React Native samples where navigating back from a scanner screen would fail to turn off the camera.
  • Fixed a bug where some updates of the BarcodeCountView were not applied correctly in iOS apps.

Deprecations​

  • The following APIs have been removed:
    • BarcodePickIconStyle

Behavioral Changes​

  • MatrixScan Check has been renamed to MatrixScan AR, including in the naming of all relevant APIs.

7.2.6​

Released: November 10, 2025

Bug Fixes​

Core​

  • Removed unnecessary retention of scanning data in some MatrixScan modes

7.2.5​

Released: November 5, 2025

Bug Fixes​

Core​

  • Fixed a memory leak in MatrixScan modes

7.2.4​

Released: August 8, 2025

No updates for this framework in this release.

7.2.3​

Released: June 24, 2025

No updates for this framework in this release.

7.2.2​

Released: May 9, 2025

Bug Fixes​

  • Fixed an issue in MatrixScan Batch occurring when Aruco marker pairs were detected in the multiscanner. The callback would return only a single marker instead of the result for marker pairs.

7.2.1​

Released: April 24, 2025

Bug Fixes​

  • Fixed a bug where some updates of the BarcodeCountView were not applied correctly in iOS apps.

7.2.0​

Released: March 31, 2025

New Features​

Barcode​

  • We simplified the lifecycle of the out-of-the-box views for Android. Now Scandit plugins handle the lifecycle automatically.
  • The following APIs have been added to Smart Label Capture:
    • LabelDateComponentFormat (enum)
    • ExpiryDateText.DataTypePatterns
    • ExpiryDateText.LabelDateFormat
    • LabelDateFormat
    • LabelDateResult
    • LabelField.AsDate()
    • PackingDateText.DataTypePatterns
    • PackingDateText.LabelDateFormat

ID​

  • ID Capture now supports the decoding of mobile driver’s licenses (currently limited to Australian licenses).

Performance Improvements​

Barcode​

  • We further optimized the resources management in SparkScan, improving battery life when in Target Mode.

Smart Label Capture​

  • Improved recognition rate of expiry dates in Smart Label Capture, with a particular focus on dot matrix fonts.

Behavioral Changes​

  • The default BarcodeBatchBasicOverlay brush when using the BarcodeBatchBasicOverlayStyle.FRAME style has been changed from white to Scandit blue.

Bug Fixes​

  • Fixed a bug where the DataCaptureView was not showing up when opening and closing the view in a short sequence.

Bug Fixes​

Core​

  • Fixed rare incorrect QR code reads of codes with a low error correction level.
  • Fixed a bug in Barcode Selection that caused inconsistent selection times for single barcodes.

7.1.3​

Released: March 26, 2025

No updates for this framework in this release.

7.1.2​

Released: March 13, 2025

Bug Fixes​

  • Fixed an issue in SparkScan where the floating button would appear in the center as opposed to bottom-right of the screen.

7.1.1​

Released: March 7, 2025

Bug Fixes​

Barcode​

  • Fixed a compatibility issue with React-Native 0.77.

Core​

  • Fixed sc_recognition_context_release to abort potentially still in-progress background set up of the barcode scanner if sc_barcode_scanner_wait_for_setup_completed was not called explicitly.

7.1.0​

Released: February 21, 2025

New Features​

Barcode​

  • MatrixScan AR in now available, offering prebuilt views designed to quickly build custom workflows with augmented reality for your existing app. By highlighting barcodes and displaying additional information or user interaction elements over them, any process can be enhanced with state-of-the-art augmented reality overlays.
  • MatrixScan Count now includes the ability to cluster barcodes that belong together. Barcodes can be auto-clustered based on their visual context, or manually grouped by the user by circling them on screen.
  • MatrixScan Count now includes the concept of a Barcode Spacial Grid, bringing the ability to map totes in a grid-like structure. Scanned codes will be returned with their relative location and can be displayed in a map view. This allows for fast and error-free in-store picking using dedicated carts and totes. The following classes have been added:
    • BarcodeSpatialGrid
    • BarcodeSpatialGridEditorView
    • BarcodeSpatialGridEditorViewSettings
    • BarcodeSpatialGridEditorViewListener
  • Introducing the Smart Duplicate Filter: unlike traditional time-based filters, this intelligent solution prevents re-scanning the same barcode unless intended, eliminating delays and improving accuracy. In user testing, it boosted task completion speeds by 10% and reduced unintentional barcode scans by 5% in workflows requiring intentional duplicate scans. Enable this new behavior by setting the existing codeDuplicateFilter property to the special value -2 — now the default for both Barcode Capture and SparkScan. See the documentation for details.
  • The following APIs have been added:
    • BarcodeFindViewSettings
      • withHardwareTriggers()
      • hardwareTriggerEnabled()
      • hardwareTriggerKeyCode()
    • BarcodeFindView
      • shouldShowZoomControl
      • hardwareTriggerSupported

ID​

  • Launched DataConsistency Verification, which identifies suspicious documents by verifying the consistency of data encoded in various parts of the document. This helps detect potential tampering or anomalies.
  • Launched a Rejection API to reject documents based on predefined criteria, streamlining validation processes. Examples include rejecting expired documents or those belonging to underage holders.
  • Enhanced the scanning capabilities for specific document types. When ScannerType::FullDocument is enabled, seamless scanning is now supported even for documents where the Scandit DataCapture SDK offers only Machine Readable Zone (MRZ) scanning.
  • Added support for scanning the Machine Readable Zone of non-standard Indian passports, where an MRZ line consists of 42 characters instead of 44.
  • Added support for scanning the Machine Readable Zone of the Chinese Mainland Travel Permit issued for non-Chinese citizens being residents of Hong Kong or Macau.
  • Unified the value of the sex field from VIZ and MRZ results so that it is always one of the values female, male or unspecified.

Label Capture​

  • To simplify working with dates in Smart Label Capture (e.g., capturing an expiry date), we’ve added native support for dates in LabelField. Now, if a field contains a date you can retrieve it as a date object using LabelField.asDate().
  • A new sample application has been created to demonstrate Smart Label Capture functionality.

Core​

  • DataCaptureContext can be used as a singleton through DataCaptureContext.SharedInstance.
    • The license key must be set using DataCaptureContext.Initialize. This step is only required once. Once initialized, the context can be used as before.
    • It is important to call DataCaptureContext.RemoveCurrentMode() when the active mode is no longer needed, such as when navigating away from a screen used for scanning.
    • The following methods have been added (also see Deprecations, below, for removed methods):
      • setMode: Sets a mode to be the active mode in the context.
      • removeCurrentMode: Removes the currently active mode in the context.
      • static sharedInstance: Returns a singleton instance of DataCaptureContext. This instance is unusable until properly configured by calling initialize() on it.
      • initialize(string licenseKey): Reinitializes the context by configuring it with a license key.
      • initialize(string licenseKey, string? frameworkName, string? frameworkVersion, string? deviceName, string? externalId, DataCaptureContextSettings settings): Reinitializes the context by configuring it with new settings.
    • Calling DataCaptureContext.addMode() or DataCaptureContext.setMode() now replaces the current mode with the new one, so it’s no longer needed to remove a mode when adding a new one.
    • The old non-singleton API is still available.

Performance Improvements​

Barcode​

  • We’ve increased the scan rate of 10% on our datasets of QR codes with high perspective distortion (so scanned at high angles). This is particularly important for cases such as receiving boxes or scanning shelf labels.

ID​

  • Scandit ID Scanning now uses an improved AI model to detect forged barcodes on US documents, which significantly improves accuracy.

Behavioral Changes​

  • XCode 16.1+ is now required.
  • After further improving the scanning speed on color-inverted QR and MicroQR codes, these variations can now be scanned without having to set any specific setting (as opposed to before), offering a better experience to developers.

Bug Fixes​

Barcode​

  • Upgraded the React sample application to React 19, providing better React strict mode handling.

ID​

  • Fixed an issue where it was not possible to scan the Visual Inspection Zone of passports if a license included the Visual Inspection Zone flag, but no Machine Readable Zone flag.
  • Fixed an issue where the scanning would become unresponsive when scanning certain passports.
  • Fixed an issue where the scanning would become unresponsive when scanning the back side of Romanian IDs.
  • Fixed an issue where some residence permits were incorrectly identified as ID cards when scanning their Machine Readable Zone.
  • Fixed an issue where it was not possible to scan an Irish Passport Card when ScannerType::FullDocumentScanner was enabled.
  • Fixed an issue where the personal identification number was not correctly anonymized on certain passports.

Deprecations​

Core​

  • The following methods of DataCaptureContext have been removed:
    • addMode: Replaced by setMode as only one mode can be active at a time.
    • removeAllModes: Replaced by removeCurrentMode as only one mode can be active at a time.

Barcode​

  • The following APIs have been removed:
    • BarcodeCountSettings.enableUnrecognizedBarcodeDetection
    • BarcodeCountView.getTextForUnrecognizedBarcodesDetectedHint
    • BarcodeCountView.setBrushForUnrecognizedBarcode
    • BarcodeCountView.setTextForUnrecognizedBarcodesDetectedHint
    • BarcodeCountViewListener.brushForUnrecognizedBarcode
    • BarcodeCountViewListener.onUnrecognizedBarcodeTapped

7.0.2​

Released: January 20, 2025

Bug Fixes​

Core​

  • Fixed an issue causing the SparkScanView to not be rendered on top of the host application content.

Barcode​

  • Fixed an issue causing the SparkScanView on iOS to not be rendered on top of the host application content.

ID​

  • Fixed an issue where it was not possible to scan Visual Inspection Zone of passports if a license included the Visual Inspection Zone flag but no Machine Readable Zone flag.
  • Fixed an issue where the scanning would become unresponsive when scanning the back of Romanian ID Cards.
  • Fixed an issue where the personal identification number was not correctly anonymized on certain passports.
  • Fixed an issue with ResidencePermit not instantiating correctly for the Spanish NIE document.

7.0.1​

Released: December 19, 2024

New Features​

  • Added support for React Native 0.76.x, which introduces the possibility to use React Native's new architecture in apps using the Scandit plugin.

Bug Fixes​

  • Fixed various compatibility issues when using the new architecture in 0.76.x+ releases of Reach Native.

7.0.0​

Released: November 29, 2024

New Features​

Scandit's Smart Data Capture SDK v7.0 addresses the industry's toughest scanning challenges with innovative solutions at every layer. Our enhanced scanning engine is context-aware, understanding both the environment and user needs. This results in smoother integrations, a richer user experience, and improved scanning performance without compromising flexibility.

Version 7.0 also offers increased versatility by supporting multiple input formats including text and barcodes.

SparkScan, our flagship barcode scanning product, embodies the full potential of v7.0 with its versatile user interface coupled with a robust, out-of-the-box scanning engine. SparkScan's success is a testament to our commitment to delivering seamless, high-performance camera-based scanning solutions.

Barcode​

  • SparkScan introduces a completely redesigned user interface, enhancing ergonomics with a simplified API and in-demand customization options. These updates make SparkScan even more versatile, seamlessly integrating with various use cases and blending smoothly into any existing workflow and UI. See the migration guide for more details.
  • Added the remove_delimiter_data extension to the CODABAR symbology.
  • The Barcode Generator now supports the generation of Aztec codes.
  • The MatrixScan Find user interface is now optimized for 4:3 camera resolution.

Core​

  • Added the following API for fetching all Open Source Software (OSS) license text and attributions for all OSS used by the Scandit SDK.
    • DataCaptureContext.openSourceSoftwareLicenseInfo()

ID​

We’ve completely redesigned the ID Capture API to streamline document capture and validation. The latest version introduces enhanced configuration options and improved result structures for an intuitive integration experience. These include:

  • Easily configure which documents you capture using IdCaptureSettings.acceptedDocuments and IdCaptureSettings.rejectedDocuments. Choose entire document classes or refine selections by specific countries for precise control.
  • Use IdCaptureSettings.scannerType to specify which document sections are relevant for your capture process.
  • With just two callbacks — IdCaptureListener.onIdCaptured for success and IdCaptureListener.onIdRejected for rejection — it's straightforward to understand outcomes and define next steps, making the API simpler and more intuitive.
  • Access key aggregated data at the top level of CapturedId or retrieve details from specific document parts, such as CapturedId.visualInspectionZone, CapturedId.machineReadableZone, and CapturedId.barcode.
  • Retrieve document images, including the complete frame, through CapturedId.images.

Performance Improvements​

  • Improved tracking of 1D barcodes that are horizontally aligned.
  • MatrixScan Count’s tracking robustness is improved with quick recovery of tracking failures.

Breaking Changes​

Barcode​

  • The MatrixScan API (BarcodeTracking) has been renamed to BarcodeBatch. All classes have been renamed accordingly (e.g. BarcodeTrackingListener → BarcodeBatchListener).

Behavioral Changes​

  • All sample applications now use the latest 0.75.x release of React Native.

Bug Fixes​

  • Fixed a memory leak in iOS 15 related to the react-native-screens dependency.

Deprecations​

In 7.0, we removed all APIs that were deprecated during the lifetime of 6.0. Before migrating to 7.0, we suggest upgrading to 6.28, fixing all deprecation warnings and then upgrading to 7.0.

Barcode​

The following SparkScan APIs have been deprecated in 7.0:

  • SparkScanView.TorchButtonVisible
  • SparkScanView.StopCapturingText
  • SparkScanView.StartCapturingText
  • SparkScanView.ResumeCapturingText
  • SparkScanView.ScanningCapturingText
  • SparkScanView.CaptureButtonBackgroundColor
  • SparkScanView.CaptureButtonActiveBackgroundColor
  • SparkScanView.CaptureButtonTintColor

Text Capture​

Text Capture functionality has been deprecated in 7.0. If your use case requires text recognition, we recommend using Smart Label Capture instead.

ID​

The legacy ID Capture UI has been removed in 7.0. If you are using the legacy UI, you must migrate to the new ID Capture API.

6.28.8​

Find earlier versions in the release notes section of version 6